DHP multi cylinder hydraulic cone crusher

DHP multi cylinder hydraulic cone crusher
  • Applications: River pebble, limestone, dolomite, granite, rhyolite and diabase
  • Feed particle size: 13-369mm
  • capacity: 27-1270t/h

DHP multi cylinder hydraulic cone crusher Introduction:

1. Intelligent design and high efficiency Intelligent design, digital display of crushing state and equipment operation, programmed control, fault alarm, automatic adjustment of oil pressure, intuitive observation and convenient adjustment. Compared with the spring cone crusher, the output of the machine is 35% - 60% higher than that of the spring cone crusher with the same cone size. Save power by 20%
2. One machine is multi-purpose and easy to operate The machine can be adjusted into three types of cavity types: coarse, medium and fine by adjusting the assembly position of parts and replacing some wear-resistant parts. In the process of use, if the machine is blocked instantly after iron passing, the fault can be discharged automatically by hydraulic device without dismantling the machine.
3. More protection for lubrication system The machine is equipped with a special thin oil lubrication system to ensure the lubricating oil flow between components and the parts can be fully lubricated. The multi-point separated hydraulic lubrication control system can ensure the double protection and overload protection of bearing lubrication
4. Brake adjustment is more convenient By controlling the hydraulic oil station, the automatic control and adjustment of the machine can be realized, and the operation procedure can be simplified

Case Sample:

Commissioning time: 2018 Project location: Poland Crushing material: pebbles Processing capacity: 100 t / h Equipment configuration: DM series cone crusher, DM fine sand recovery device, DM series conveying equipment


DHP multi cylinder hydraulic cone crusherTechnical Parameter:

Model

Cavity type

Max.feed size (mm)
 Min.discharge opening (mm)
Motor power (kw)
 Closed side setting(mm) Capacity(t/h)
 

weight(Without motor)(t)

10
13
16
19
22
25
38
51
64
DHP420
C
180
13
132
 
120
140
155
185
210
270
 
 
16
M
130
10
132
105
115
125
140
170
180
 
 
 
16
F
90
10
132
85
110
115
145
 
 
 
 
 
16
DHP630
C
215
19
220
 
 
 
210
230
270
365
455
 
27
M
160
16
220
 
 
160
185
210
230
 
 
 
27
F
115
13
220
 
155
200
220
240
 
 
 
 
27
DHP840
C
235
22
250
 
 
 
 
275
325
440
550
605
37
M
175
19
250
 
 
 
225
250
275
335
 
 
37
F
130
13
250
 
185
220
245
265
285
 
 
 
37
DHP1050
C
350
22
280-315
 
 
 
 
345
410
550
685
760
45
M
203
16
280-315
 
 
240
280
315
345
 
 
 
45
F
140
13
280-315
 
195
235
275
355
 
 
 
 
45

DHP multi cylinder hydraulic cone crusher Performance

1.Widely used in the Quarrying and Mining industries,
2.the DMC Crusher is the result of utilizing part of the World famous Symons Gyratory design, enhancing the crushing chamber to result in more crushing and less grinding action, and introducing a hydraulically operated cavity clearance system to clear blockages.
3.The machines are available in model sizes of 1000mm, 1160mm, 1300mm, 1380mm, 1650mm, and 1950mm.
4.All models are available to be fitted with crushing cavities of Extra Fine, Fine, Medium, or Coarse.

DHP multi cylinder hydraulic cone crusher Working Principle

When DHP super hydraulic cone crusher works, the motor rotates through the belt pulley or coupling Driven by the eccentric sleeve, the drive shaft and the cone part rotate and swing around a fixed part, so that the crushing wall of the cone crusher sometimes approaches or leaves the surface of the white wall fixed on the adjusting sleeve, so that the ore is continuously impacted, squeezed and bent in the crushing chamber to realize the ore crushing.
DHP multi cylinder hydraulic cone crusher


Top
`