What factors will cause the crusher to stop suddenlySudden stop of the crusher has a great impact on the equipment, in order to avoid the occurrence of this phenomenon, the usual team crusher should be more inspection and maintenance.
Check the working voltage of the crusher.If the working voltage of the crusher is unstable or too low, it is easy to stop the equipment.Therefore, the working voltage of the crusher should be checked regularly and adjusted timely to meet the requirements of the working voltage of the main machine;Check for loose parts.If the tight bushing of the eccentric shaft becomes loose, the eccentric shaft will become stuck, which will lead to the shutdown of the equipment.In addition, if any other parts become loose, it will affect the normal operation of the equipment.Therefore, in the production should pay attention to check whether the components are loose, to ensure that the components are firmly installed;Check the tightness of the triangle belt.If the triangle belt is too loose, it cannot provide enough power for the operation of the equipment. If it is too tight, the belt will break easily and affect the operation of the crusher.Therefore, before each start of the machine, as well as the equipment in the process of breaking, should pay attention to check whether the tightness of the belt is appropriate.
What factors will cause the crusher to stop suddenly?
Maintenance of thrust plate.Before starting the crusher, an appropriate amount of grease should be injected between the thrust plate and the adjusting seat to reduce the damage of the thrust plate of the crusher;Bearing maintenance.Bearing directly affects the normal operation of the crusher, so the maintenance of bearing is very important.In the production should pay attention to check the use of the bearing, if the bearing has been damaged should be replaced in time.In addition, is to do a good job of bearing lubrication, to prevent the crusher bearing temperature is too high.
What causes the sudden stop of jaw crusher?
Jaw crusher as the first road equipment in the crushing work, plays a key role in the crushing, I do not know whether you encounter equipment in the operation of the state of sudden shutdown, if you do not understand the current situation will certainly think that the crusher is what a big problem or is how.In fact, not as serious as you imagine, in general, jaw crusher sudden stop is nothing more than the following circumstances:
1. The discharge port is blocked, resulting in the filling of the material. At this time, the plugging of the discharge port shall be removed to ensure the smooth discharge
2. The triangle belt is too loose, which causes the belt to slip. In this case, the triangle belt should be tightened or replaced.
3. If the voltage in the work site is too low, the host machine is unable to break after it encounters large materials. In this case, the voltage in the work site should be adjusted to meet the requirements of the working voltage of the host machine;
4. The eccentric shaft of the equipment is tight, and the fixed bushing becomes loose, resulting in no clearance on both sides of the bearing seat of the frame. As a result, the eccentric shaft is stuck and cannot be rotated, so we need to re-install or replace the fixed bushing;
The bearing is damaged, at this time we need to replace it.
Presumably now you have an understanding of the jaw crusher encounter sudden stop phenomenon, usually as long as in production in strict accordance with the operation and maintenance methods of equipment, the shutdown phenomenon can be completely controlled or reduced.